What are the technical characteristics of active lathe processing in machining?
1, easy to ensure the accuracy of the workpiece surface. When the active lathes are machined, the workpiece rotates around a certain fixed axis, each surface has the same reverse axis, so it is easy to ensure the requirement of the coaxiality between the processing surfaces.
2. The cutting process is relatively stable. In addition to the intermittent appearance, the lathe machining process is usually performed one after the other. Unlike milling and planing, in one go, the cutters repeatedly cut in and cut out, and the impact occurs.
3, for the finishing of non-ferrous metal parts. Some non-ferrous metal parts, because of their own low hardness, good plasticity, it is difficult to get a bright appearance with other processing methods.
4, the tool is simple. The turning tool is the most simple tool in the tool, making, sharpening and device are very convenient, which makes it easy to select a reasonable viewpoint based on the detailed processing requirements.
5, the tool is simple. The turning tool is the simplest type of tool. It is easy to manufacture, sharpen and install. This makes it easy to choose a reasonable angle according to the specific machining requirements.