Any mechanical equipment will inevitably cause some failures in the course of use. This is impossible to avoid. Even Microsoft, which has experienced several decades of wind and rain, cannot guarantee that windows will not be abnormal. The automatic lock screw machine equipment is the same, without any A company can guarantee 100% perfection. Since it cannot be avoided, we need to know how to avoid and solve it.
The following products solid precision hardware simple talk about automatic locking screw machine:
1. Automatic lock screw machine can not boot
Solution: The screw machine can not boot, the main reason is that the power supply is not powered,
The power supply is not powered. Check if the socket is loose, whether the switch is connected, whether the power cable is damaged, and whether the fuse is burned out.
2. Automatic lock screw machine sliding tooth float lock;
Solution:
For exceptions such as slide locks, check if the torque setting is OK; check if the screw meets the standard;
The size of the screw torque is set according to the screw at the time of debugging. If the screws are replaced in subsequent operations, there will be some influence.
3 screw locks do not go in
Solution: If the screw lock does not enter, first determine whether the height of the pad is reasonable, and then check whether the torque is too small;