Machine operation is a very rigorous process. What should the machine operator pay attention to?
1. In work
(1) The operator should operate according to the specified requirements. If he wants to leave the machine tool, the air source and power supply should be turned off, and the machine tool should not be left unattended.
(2) The machine tool can not be overloaded or over-utilized.
(3) Cutters, workpieces, etc. should be clamped correctly, and the clamps should be secure and cannot be hit with heavy hammers.
(4) The transmission and feed mechanism must be checked for proper operation.
(5) The tools and grinding tools should be kept sharp. If they become blunt or they are damaged, they should be replaced immediately.
(6) The safety guard cannot be disassembled. If it is not, the machine tool cannot be used.
(7) The tool, workpiece, or other debris cannot be placed on the machine tool.
(8) The operating conditions of the machine tool should be noted at any time. If there is any abnormality, stop and check immediately.
(9) The machine tool should be kept clean and clean.
2. After work
(1) The operating handle, switch, etc. must be in the correct position.
(2) After the machine stops running, shut off the air supply and the power supply.
(3) Clean the machine, clean the job site, and then perform machine maintenance.
(5)Make job records and handover work