Why hinge screws slip, how to prevent
The importance of hinges for furniture and kitchen cabinets is self-evident. If the screws of the hinges are not good, it will take a lot of trouble. If the tail screws are slippery, the cabinet doors and the cabinet will be detached. If it is not easy to use the adjusting screws, then there will be gaps in the seams. The use of the functions will be greatly reduced, which will eventually affect the appraisers of the furniture and kitchen cabinets: the quality is too poor.
Get such an assessment, then your board information and how well the workmanship is all nonsense, so the importance of hinged screws is necessary to cause attention.
To determine if the screw can stand the test, we usually check this:
1. Take a screwdriver and use a little more force than normal, multiple tests on the screws*. Of course, this is one way.
2. One of the other things I have to say is the hardware structural problem: whether the bite of the screw is satisfied or not, many hinge bolts in the market have only two and a half laps. This is a structural death that is very dead, and the appearance of the sliding teeth. The rate is very large. It is necessary for us to note that we cannot purchase such goods.
3. Look at the screw thread is not clear, usually poor screw work and data are poor, thread mess.
4. Is the longer the screw, the better? This is a fault. The length of the screw can be as long as it is appropriate, such as conditioning screws, even if you use 15 centimeters, but you can not use the actual, because if you conditioning too much, there must be a seam, affecting the furniture, kitchen cabinet Observability, hierarchy, this is not desirable.
5. When the user uses too much force will also damage the hinge screw, the formation of sliding teeth, should grasp the strength of the wind and the speed of the damage caused by the screws.