In the process of production and processing in the machinery industry, although there are some details that are insignificant, if we can learn from it, we can use it in turn, use our brains and try our best to help our work. For your reference, you can summarize the tips provided by a master of the precision machining industry.
Tip 1: Remove the jaws of the vise, process two threaded holes of two M4s, and fasten the two steel plates with the jaws to a thickness of 1.5mm with an aluminum countersunk rivet riveting a hard brass plate with a thickness of 0.8mm. It is fastened to the jaws with M4 countersunk screws to form a durable soft jaw. This also protects hardware components from being pinched and is interchangeable.
Tip 2: The use of magnets to absorb small parts (fees) is not easy to absorb and take, can suck an iron plate under the magnet, not only can suck a lot of small pieces, but also will pull the iron plate, small pieces will immediately automatically pour The collection box is not enough to touch the heart, but it is very practical.
Tip 3: When the belt pulley is driven, the belt pulley often slips with the wheel shaft. On the wheel shaft, a series of nests are hatched with ¢15~18mm ditch bits, so that the adsorption force can be formed to prevent slipping and turning waste into treasure. The boss will reward.
Tip Four: When the Allen wrench handle is short and cannot work, insert a wrench with a slightly larger diameter than the wrench from a milling slot into the slot, which can be used as a long handle.
Tip 5: As for the tightening of the workpiece, it is the first position and then the clamping, but for a workpiece, the first clamping and repositioning, because the clamping will certainly try to deform the workpiece, so it should be clamped and repositioned, for 6 points Positioning, find limit its degree of freedom.
Many of these tips and knocks were discovered by employees during normal precision parts processing work. These tips don't really represent anything on the surface, but when you use more, you can bring many things to the company including yourself. the benefits of. I hope you will find more tips and tricks in the future