Ordinary solid wood furniture usually uses beech, white oak, ash, beech, beech, rubber wood, beech wood, and precious mahogany furniture mainly uses rosewood, chicken wing wood, rosewood. The market for solid wood furniture is confusing, and things like shoddy and confusing tree species often occur. It is better to buy brand-name products. At the same time, we must pay attention to the fact that the price of wood is increasing day by day, and there is definitely fraud in that it is too cheap.
Observe the advantages and disadvantages of wood
Open the furniture cabinet door and drawer to observe whether the wood is dry, white, and whether the texture is tight and delicate. If you have furniture made of materials such as particle board, density board, and primary molding board, open the cabinet door or drawer and smell any pungent odors.
Observe wood for defects
The main parts of furniture such as pillars and load-bearing bars connecting the pillars to the ground should not have large knots or cracks. The structure is firm, the frame must not be loosened, and no breaks or breaks are allowed. All parts of the wood-based panels used in furniture should be sealed. All kinds of accessories must be installed without missing parts, missing nails, or nails.
Observe board strength
The board surface emphasizes the use of a finger press to feel the fastness of the board surface. One side of the material should have a well-shaped skeleton to be fixed, if the skeleton is sparse, a surface will feel empty and the panel vibrates greatly; the drawer bottom plate applies hand pressure to test the strength, generally the bottom of the partition plate is used, and the area is large. The partition should be made of five-layer boards. Cabinet doors and drawer switches must be flexible. When the panel is covered with thin wood and other materials, the color of the finished product should be similar to that of the product. The surface paint film of the product is not allowed to be wrinkled, sticky, or leak paint.
Check stability and safety
Observe whether there is a tilt in the drawer or the door frame, whether there is skewness in the eye of the eye, or if the eye hole is too large, or if the head is not strict, the process level is low. Wooden furniture should be safe and stable. When the two doors are opened 90 degrees, gently pull forward with the hand, the cabinet can not automatically tip forward; the glass of the bookcase door should be edging; the mirror and dressing The back plate should be installed on the table, and the bead should be fixed on the glass surface. Individual parts of the furniture (such as legs, drawers, cabinet doors, or brackets, etc.) must support sufficient force. You should push the top corner of the furniture or sit on it and try to see if the furniture is firm