The automatic screw feeder consists of a feeding system and a lock-up system. The feeding part, also known as the screw placement machine and the screw feeder, is a relatively simple arrangement of the screws in a row for the purpose of improving work efficiency. A small automation device widely used in the electronics industry. A machine can be used for a variety of standard screws. The size of the screw has a certain adjustment space. From M1 to M8, and with regard to special screws, there is an operable space. The automatic screw feeder equipment is planned separately, and the feeding system and vibration drive are independently controlled, and the desired delay time can be set freely. When an abnormal condition occurs, the screw feeder will send out the red alarm function! It is as simple and easy to operate as other screw feeders!
1. When removing the screw, as far as the orientation of the screw head is concerned, just put the bit into the guide of the bit, slide down the guide, and then pull the screw out toward the operator.
2. Compared with the traditional screw plate, each screw can save 1.4 seconds and the productivity can reach 6 times!
3. Simple operation, even if the layman can immediately learn how to operate
4. It is not necessary to align the screws, just put the screws into the feeding room in batches. It is widely used in various electronic work, car, TV, air conditioner, etc.