City screws as a factory with screw customization experience, but it is not all-powerful, what screws can be customized, it is even more impossible to produce a high-quality screw according to the customer's several parameters; random; Stainless steel screw refers to the shape of a screw made of stainless steel screw wire rod, and it is threaded in the rear. Its material is stainless steel. Stainless steel screws are divided into stainless steel SUS201 screws, stainless steel SUS304 screws, and stainless steel SUS316 screws.
As an important part of screw customization, the drawing of screws becomes even more important.
In general, we first ask whether the customer has drawings. Electrical screws are "quantity products" and are not hand-made artworks. In mass production, they are aimed at achieving high-precision, stable quality and consumer prices. If the customer has drawings, he will first study the customer's drawings and see if the customer's drawing parameters, tolerances, etc. are in line with the production (some customers do not understand the screws (Find out), the screws are designed according to the product, but may exist The design of the screw does not meet the problem of production (Emerson), as well as the evaluation of production difficulty, price, etc.
If the customer can not provide drawings, only the samples, usually we will draw the same drawings based on the sample, and the customer's requirements, including (bāo kuò) specifications, material quality, tolerances, etc. are all reflected on the drawings (tǐ xiàn). Stainless steel screw refers to the shape of a screw made of stainless steel screw wire rod, and it is threaded in the rear. Its material is stainless steel. Stainless steel screws are divided into stainless steel SUS201 screws, stainless steel SUS304 screws, and stainless steel SUS316 screws.
Before and after a drawing, at least the customer needs to go through 2 audits and confirm it once before transferring the drawings to the workshop to arrange production. Each parameter and each request are required to be communicated with the customer through detailed communication. A drawing is the source of a screw. If any parameter of the drawing is wrong, it will affect all subsequent processes. The loss will not be mentioned first. The simplest screw, the production cycle will not be less than 2 Days, not to mention some hard screws that need to open molds and proofs, they just need more than ten or twenty days to do just that, and even last month may be a long delay, not just as a manufacturer. , but also customers can not follow.
A drawing at least before and after the need to pass the customer 2 audits, 1 confirmation, {to map custom} can be transferred to the workshop to arrange the production of production, each parameter, each request is required and customer details (xiáng xì ) Communication is confirmed again. A drawing is a source of the screw. If any parameter of the drawing is wrong, it will affect all subsequent processes. The loss will not be mentioned first. Screws, the production cycle will not be less than 2 days, not to mention some hard screws that need to open the mold, proofing, that kind of screw just need to do more than ten or twenty days, or even last month is possible, so long The fallacy is not only because we, as manufacturers, but also customers can't follow suit.,