Screw Surface Treated With Black Zinc Plating

Jun 07, 2022

Leave a message

There are two types of black electroplating, black zinc and black nickel. The process principle is basically the same, but the formula of the electroplating solution and the post-treatment frame or passivation solution are different. The chemical properties of zinc are lively, it is easy to oxidize and darken in the atmosphere, and finally produces "white rust" corrosion. It is the passivation treatment of the zinc layer. The passivation film can be divided into white passivation (white zinc), light blue (blue zinc), black passivation (black zinc), military green passivation (green zinc), etc.


Black zinc plating: The electroplating process is: degreasing-cleaning-weak acid etching-electro-galvanizing-cleaning-passivation-cleaning-drying-over the frame; the last frame is mainly black oil (a kind of paint), Tianna The water and rubber water are mixed according to a certain ratio. Its main function is to improve the black uniformity and brightness of the screw surface and improve the corrosion resistance of the screw. The anti-corrosion ability of the oil can also be improved.


The black zinc screw neutral salt spray test is 12 hours, the industry level is relatively high, and there is no unqualified phenomenon in the routine test. It is darker than black nickel in appearance, and is closer to oxide black and electrophoretic black. The method of distinguishing it is to grind a few times on white paper to expose the bluish white of zinc.

b03533fa828ba61e8db4d2248e431902314e59e6