Non-standard parts refer to indefinite, not series, or non-standard metal structures. Non-standard parts in the cement industry usually refer to components such as ladles, ducts, steel silos, gates, brackets, and covers. Because non-standard parts are connected parts between devices, whether the design of non-standard parts is reasonable or not has an important influence on construction and production. If the design is not proper, it will cause waste in processing and will also cause difficulties in installation. To cause trouble for production.
People are pursuing the development of personalized products, and today's production methods are slowly changing from the previous batch production to the small batch production. Therefore, there are a large number of special parts that are used by companies that have a very large amount of usage or are called non-standard parts. In order to meet the requirements of automated detection of non-standard parts in automated production lines, an automatic detection device was designed. The on-line inspection of one or several kinds of non-standard parts was realized by means of automatic feeding, fixture positioning and spacers, and optical non-contact measurement methods. Inspection of non-standard parts improves inspection accuracy and efficiency.