Lacing nuts are used in the field of fastening and have a wide range of applications. They are mainly used in the assembly of electromechanical and light industrial products such as aviation, furniture, automobiles, instruments, machinery, and decorations. Of course, with the pull rivet nut grows more common, it is often difficult to distinguish.
Many customers inquire about the difference between the rivet nut and the rivet nut. How to use it? The following section discusses the difference between a rivet nut and a rivet nut.
First of all, from the appearance, we can look at the appearance of a difference.
From the appearance point of view, the difference between the rivet nut and the rivet nut is still very big, but their main function is almost the same. There are different ways of installing just for the thin plate to provide the thread. The way of installation greatly determines the use and use of a nut.
First of all, the way to install the rivet nut is to use a rivet gun to pull the rivet, so it is suitable for use in places like the square tube tube is not easy to pressure riveting place to operate. Riveting nuts also make up for some of the disadvantages of electric welding, such as aesthetics, and places where the welding machine is not easy, such as thin plates. Pull rivet nuts are used in some cabinets, square tubes, fan production, equipment production, and zinc steel guardrails.
Secondly, the pressure riveting nut and pressure riveting nut are also used to provide threads on the thin edge of the cabinet of the cabinet. Its operation method is to press and rivet the riveting machine. If this is the case, the requirement will be higher and a riveting machine will be needed. The rivet nut is very flat after riveting to the edge of the sheet and will not have a protrusion. Pressure riveting nut is mainly used in the production of some chassis cabinets, there are some equipment production, water pumps, automobiles, and many other production companies.
The main point is that the rivet nut can be used on the top of the finished product and semi-finished products, and the rivet nut must be used on the edge of the thin plate. The finished product does not use the pressure rivet nut, because it is not suitable for the operation of the riveting machine.