How to set up the most simple tool for CNC machining in a machining center? Simply say that the X direction and then the Y direction are the following:
1, first on the X direction, take the side of the tool obliquely gently touch the lower right after the tool is lifted in the Z direction and clear the relative coordinates of the CNC machining center;
2. Put the tool on the left side of the material, gently touch the tool and the material, and lift the tool. This is to write down the X value of the relative coordinate of the machine tool, move the tool to half of the relative coordinate X, and record the absolute coordinates of the machine tool. X value, and press (INPUT) input coordinate system can be (some systems can also be measured by) Fana system can be "measured" can also be Y direction;
3, with the tool in front of the material hit, the tool and the material gently touch, the tool is lifted in the Z direction, the relative coordinates of the machine tool is cleared;
4, the tool mentioned on the back of the material, the tool and the material gently contact, lift the tool, which is to write down the machine tool relative coordinates of the Y value, the tool is moved to the relative coordinates of the Y, record the absolute coordinates of the machine tool Y value, and press (INPUT) in the input coordinate system, the Fanako system can press "Measurement", and can also use the Z direction tool setting method. The Z toolsetting of the CNC milling machine moves the tool to the surface on the workpiece to the Z direction zero point. Above, the tool is in light contact with the surface, note the Z-direction value in the coordinate system of the machine tool at this time, and input it into the corresponding coordinate system.