The moving lathe is a high-performance, high-precision, low-noise, automatic knife-type lathe, and is an automatic processing machine that controls the machining program by a cam. In addition, there are some CNC automatic lathes, pneumatic automatic lathes and take-center type automatic lathes. The basic core is that after a certain setting and tuning, they can automatically process the same product for a long time. Suitable for processing precision parts such as copper, aluminum, iron, plastics, etc. Suitable for instruments, watches, automobiles, motorcycles, bicycles, glasses, stationery, hardware, sanitary ware, electronic parts, connectors, computers, mobile phones, electromechanical, military and other industries. Process small parts, especially more complex parts.
The machine tool has the automatic processing, the processing speed is quick, the complicated part once processes the shaping, the processing precision is accurate and reliable, the automatic feeding, the material finishes the automatic shutdown, the production efficiency is high. However, when machining workpieces with automatic lathes, note the following:
(1) Before working, lubricate the machine according to the regulations, check whether the handles are in place, and start the slow running for five minutes to confirm that everything is working properly.
(2) The chuck chuck should be kept in prison. The wrench cannot be left on the chuck or chuck when the machine is turned on. The
(3) The workpiece and the tool must be securely clamped, and the tool bar should not protrude too long (except for the boring hole); the small tool holder must be stopped to prevent the tool from colliding with the chuck, workpiece, or cutting hands.
(4) When the workpiece is running, the operator cannot stand on the workpiece, the body does not rely on the lathe, and the foot does not step on the oil pan.
(5) Chip breakers and retaining screens should be used for high speed cutting.
(6) High speed anti-braking is forbidden, and the return and parking should be stable.
(7) Remove iron filings, apply a brush or special hook.
(8) Use a trowel to light the workpiece, must be right hand in front, left hand in the back; use sanding cloth to light the workpiece, use "hand clamp" and other tools to prevent scratches.
(9) All labor, quantity, and cutting tools should be placed in a nearby safe place and be neat and orderly. The
(10) The lathe has not stopped and it is forbidden to take the workpiece or measure the workpiece at the front.
(11) It is forbidden to open or remove the guard when working on the lathe.
(12) Close to work, clean and wipe the lathe, and return the tailstock and carriage to the right end of the bed.