Stainless steel non-standard screws can often be seen in industrial production and life, indicating that the use of stainless steel non-standard screws is very wide, today Shenzhen non-standard screw manufacturers product solid hardware for you to explain the use of stainless steel non-standard screws
Types of stainless steel non-standard screws Flat heads Hex and hex rivet nuts, with through holes, blind holes, with knurled and no knurled
The use of stainless steel non-standard screws If a nut of a product needs to be installed outside,and the space inside the product is too small to allow the press head of the riveter to enter the pressure riveting and the budding method cannot reach the strength requirements, then the riveting and Rising riveting is not feasible. Must use riveting. Applicable to all thickness plate, pipe (0.5MM-6MM) fastening field. The use of pneumatic or manual riveting gun can be riveted once, convenient and firm; replace the traditional welding nut, make up for the metal sheet, thin tube welding easy to melt, weld nut is not smooth and other shortcomings.
Stainless steel non-standard screws are mainly used in the bolt connection of non-structural bearing, such as rail cars, road passenger cars, ships and other interior parts. The improved anti-spin is more excellent than the aircraft's pallet nuts. Its advantages are: Lighter weight, no need to fasten the pallet nut in advance, the back space of the substrate can still be used, etc