Quick Details
CNC Machining or Not:CNC Machining
Type:Broaching, Drilling, Etching / Chemical Machining, Laser Machining, Milling, Other Machining Services, Rapid Prototyping, Turning, Wire EDM
Material Capabilities:Aluminum, Brass, Bronze, Copper, Hardened Metals, Precious Metals, Stainless Steel, Steel Alloys, iron
Micro Machining or Not:Micro Machining
Place of Origin:Guangdong, China (Mainland)
Model Number:pg00203
Brand Name:Lanejoy
Service:Customized OEM
Process:Cnc Turning
Packaging & Delivery
Packaging Details
1, With bubble bag,. the rust prevention during transport.
2, Use glues tape to seal cartons. To be packed in cartons or wooden case. Prevent vibration and slide.
3, Deliver out by DHL,FEDEX Or according to customers' requirement.
Delivery Time
7days
Service brarvice braervice brand
"Why 100,000 Why" said: Hexagon screw can be reduced by 60 degrees. If the space is relatively small, as long as the wrench can be rotated 60 degrees to install the screw, which is the product of twisting angle and side length after mutual compromise.
So the standard thread is the most widely used. However, it also has the disadvantage that the self-locking thread is inferior to the fine thread, so spring washers or other self-locking devices must be installed where vibration is severe. Fine thread is generally not used for large force work, it is mainly used for positioning, adjustment, fixed and so on. Its feature is that the outer diameter of the nut can be much smaller than the standard thread, and is especially suitable for thin-walled cylindrical parts. Fine thread is widely used in various optical instruments. In addition, the self-locking of the single-head fine thread is very good, and it can be used to accurately adjust the blade that can be controlled. There are many similar instruments used in the micrometer. The disadvantage of the fine thread is that the thread is easy to break, affecting the installation and removal. A slight dimensional error may cause the screw and the nut to be damaged at the same time.