Air Stepper Aluminum CNC Lathe Parts
Quick Details Place of Origin:Guangdong, China (Mainland) Brand Name:PIngood Model Number:OEM Standard:ISO Material:Steel Packaging & Delivery Packaging Details:opp bag /carton Delivery Time:7 days Shenzhen Pingood Precision Hardware Co. Ltd. is a professional large-scale manufacturer of all...
Place of Origin:Guangdong, China (Mainland)
Packaging & Delivery
Packaging Details:opp bag /carton
Delivery Time:7 days
A die generally uses a movable die. The advantage is that the length of the wire needed at the head is all fed into a die and the spring is used to press the die face with a special screw head die face, and the punch die is in a punch sleeve. In the inner movement, the shape of the front end of the die is extruded from the wire of the burden, and the spring is punched back to the normal position to prevent bending or wrinkles. The parallel flow of the wire causes the fiber flow line to be normal, so that it can be prevented from being broken. Punching filter. A die diameter design can not be too large, such as the result of the second punch after the screw head type has layered, the head type will be a layer of wrinkles in the middle. The diameter of a die must not be too small, or the center of the special screw may be unstable. Sometimes the left and right sometimes turn right, and the special screw cross is very easy to break and difficult to adjust.
Nonparametric development of non-standard parts,The non-standard parts are mainly the other parts that are not controlled by the company but have no strict standard specifications and no related parameters. The more mature an industry is, the higher the degree of generalization of standardization, the more standard parts, and the lower the industry cost. However, over-standardization should be avoided, resulting in monotonous product categories and low-end competition. There are many varieties of non-standard parts, there is no very standardized classification, are generally based on market needs and their own brand development, and extend the vitality of the product and independent research and development. Non-standard parts refer to the commonly used non-standard parts such as screws, keys, pins, rolling bearings, etc., which have been completely standardized in terms of structure, dimensions, drawing, marking, etc., and are produced by specialized factories.