Straight Hair Rod High Strength Car CNC Bed
Overview Quick Details CNC Machining or Not:CNC Machining Type:Etching / Chemical Machining, Other Machining Services Material Capabilities:Brass, Precious Metals, Stainless Steel Micro Machining or Not:Micro Machining Place of Origin:Guangdong, China (Mainland) Model Number:pg219 Brand...
CNC Machining or Not:CNC Machining
Type:Etching / Chemical Machining, Other Machining Services
Material Capabilities:Brass, Precious Metals, Stainless Steel
Micro Machining or Not:Micro Machining
Place of Origin:Guangdong, China (Mainland)
Standard:GB / DIN
Certificate:ISO14001;2015 / ISO9001;2015
Packaging & Delivery
opp bag / carton
Delivery Time 7 days
Packaging & Shipping
Trade & Market
The application of CNC lathe machining is extensive, including manufacturing, aviation, medical, and so on. Because CNC lathes have unparalleled advantages over ordinary lathes.
1. The rigidity of CNC lathes is high compared to ordinary lathes. In order to meet the high precision CNC lathe, the rigidity of the CNC lathe must be high to achieve high-precision machining requirements;
2. The spindle of the ordinary lathe is shifted by the motor, belt, and gear deputy. The CNC machine tool is horizontally and longitudinally driven by two servo motors respectively. Therefore, relative parts such as the hanging wheel and the clutch are not used. Shorten the drive chain
The box requires many surfaces to be machined. The machining requirements for each surface are different, and some require high precision, such as spindle holes, so the machining accuracy of the box becomes a key issue for the process. In view of this, In the processing of parts, we must also pay attention to the following points:
1. The roughing and finishing stages should be separated
Above we also mentioned that there are many surfaces to be machined and the accuracy requirements are not the same. Therefore, it is necessary to separate the coarse and fine processing during operation, and it is not possible to carry out fine machining immediately after rough machining, because this will easily lead to deformation of the box. Affect the accuracy.
2, should be in accordance with the first rear hole processing sequence
The first processing of the plane not only cuts off the unevenness of the surface of the rough surface, but also traps sand on the surface. What is more important is that when processing the holes distributed on the plane, it is convenient to draw lines and correct them, and when the boring tool starts to boring holes, There is no impact vibration or damage to the tool due to uneven surfaces. Therefore, it is generally best to machine the plane first